ToolPRO CLP18LD.9, Инструкция по эксплуатации

Страница: 10 / 12

Customer Helpline 1300 889 028
10
Operating Instructions
3. ADJUSTING THE HEAD OF WORK LIGHT (SEE FIG F, G)
The head of work light can be set in a variety of positions. Loose the adjusting knob to
make the head of work light in place, then tighten the adjusting knob to fix the head of
work light.
WARNING: Do not put hands or fingers between adjustable head and bracket when
positioning the work light!
4. GEAR ADJUSTMENT (SEE FIG H)
The light has three gears.
Gear I Press on/off switch, the Floor Light will come on.
Gear II Press on/off switch again, the light will be brighter.
Gear III Press on/off switch the third time, the light will be the brightest.
NOTE: If you press the on/off switch in Gear III,the light will be shut off.
WARNING: Do not direct the light beam into your eyes.
F G
H