Customer Helpline
1300 889 028
12
Operating Instructions
2. REMOVE OR INSERT BATTERY PACK (SEE FIG. B,C)
Press the battery pack release button and remove the battery pack from the tool. After
recharge slide the battery pack into tool’s battery port. A simple push and slight pressure
will be sufficient.
OPERATION
1. ON / OFF SWITCH (SEE FIG. D)
Depress the On/Off switch to start and release it to stop your drill.
The on/off switch is fitted with a brake function which stops your chuck immediately when
you quickly release the switch.
It is also a variable speed switch that delivers higher speed and torque with increased
trigger pressure. Speed is controlled by the amount of On/Off switch depression.
WARNING: Do not operate for long periods at low speed because excess heat will be
produced internally. When overload occurs, release the On/Off switch immediately
to avoid the motor overheating.
2. SWITCH LOCK (SEE FIG. E)
The On/Off switch can be locked in the OFF position. This helps to reduce the possibility of
accidental starting when not in use. To lock the On/Off switch, place the rotation control in
the center position.
1
2
CLOSE
OPEN
1
2
D
E
F1
F2
G
H
I
J
B
C
1
2
CLOSE
OPEN
1
2
D
E
F1
F2
G
H
I
J
B
C
