ToolPRO ACG18LD Скачать руководство пользователя страница 7

Customer Helpline

 1300 889 028

ORIGINAL INSTRUCTIONS

7

Charging Procedure

Troubleshooting

1. I CANNOT FIT THE BATTERY INTO THE BATTERY CHARGER.WHY?

Check if the charger and the battery pack are specifically designed for working together. 

2. REASONS FOR DIFFERENT CHARGING TIMES.

1) If the battery pack is only partly discharged it may be re-charged in less than 3 hours.
2) If the battery pack and ambient temperature are very cold then recharging may take more 
hours.
3) If the battery pack is very hot you must remove your battery pack from the charger and allow 
your battery pack to cool first to ambient temperature and then recharging can be started.

NOTE: 

The charging time can be affected by many reasons which do not indicate defects in 

your product. Remove the plug from the socket before carrying out any adjustment, servicing 
or maintenance.

CHARGING INDICATOR 

This charger is designed to detect some problems that can arise with battery packs. 
Indicator lights indicate problems (see table below). If this occurs, insert a new battery 
pack to determine if the charger is OK. If the new battery charges correctly, then the 
original pack is defective and should be returned to a service center or recycling service 
center. If the new battery pack displays the same problem as the original Battery Pack, 
have the charger tested at an authorized service center.

Light

ON/OFF flash

Status

Red on

            

 Charging 

Red flash

       

 -  -  -  -  -

 Defective  Battery

Green on

         

 Fully Charged

Green flash

   

- -  -  -  -  -

 Hot/Cold Delay

Содержание ACG18LD













Отзывы: