7.
8.
9.
Slowly raise the motorcycle by pumping the lifting foot pedal. Recheck stability once the
motorcycle is off ground.
Once the desired height is reached, fully engage the locking mechanism [the Safety
Locking Bar (15) and the R Pin (17)]. Do not extend the height of the
beyond its maximum working height.
Dirt Bike Scissor
Lift
TO LOWER: Remove the
R Pin (17)], depressing the Release Pedal (29) until the
is
locking mechanism [the Safety Locking Bar (15) and the
Dirt Bike Scissor Lift
in the
fully lowered position.
TO ADD OIL
MAINTENANCE
Place the
Dirt Bike Scissor Lift
with the oil filler plug be horizontally then remove the oil
filler plug. Fill until oil is level with the filler plug hole. It is recommended to use a good
grade Hydraulic Fluid (ISO 10-15 or equivalent).
Page 3
150KG DIRT BIKE SCISSOR LIFT
OPERATING INSTRUCTIONS
1.
2.
1.
2.
3.
4.
3.
4.
5.
6.
This
Dirt Bike Scissor Lift
should be used for lifting and lowering only.
BEFORE INITIAL USE: Lubricate all pivoting and moving points with lubricating oil and
after every 50 lifting/lowering cycles or 3 months (whichever occurs first).
Keep the
Dirt Bike Scissor Lift
clean and well lubricated.
Lubricate all pivoting and moving points with lubricating oil and after every 50
lifting/lowering cycles or 3 months (whichever occurs first).
When not in use, always leave the
in the fully lowered position.
Dirt Bike Scissor Lift
The
should be inspected for any abnormal conditions such as
cracks in the welds and damaged, bent or missing parts before each use. The
showing any signs of not being in full operating condition should not
be used.
Dirt Bike Scissor Lift
Dirt
Bike Scissor Lift
Place the motorcycle in a suitable area, checking that the surface on which the
Dirt
Bike Scissor Lift
is solid
and flat.
Place the
Dirt Bike Scissor Lift
under the motorcycle, ensure that the centre of gravity
of the motorcycle is centrally located to the middle of the lift/stand’s platform.
Pump the lifting foot pedal to raise the platform until it makes contact with the
underside of
the motorcycle.
Ensure the motorcycle being lifted is firmly secured to the
Dirt Bike Scissor Lift
by:
a) Hooking on the J-Hooks (4) to the Chains of the assembled U Bolt with Chains (27),
they are the supplied mounting points of
Dirt Bike Scissor Lift
.
b) Using the strong points of the motorcycle. Consult the vehicle manufacturers owner’s
manual for guidance.
c) Passing through the J-Hooks (4) into the strong points of motorcycle, place the
Washers (5) into the end of J-Hooks (4), screw in the Threaded Knobs (6) until they
are tighten enough.