10
OPERATION METHOD
18
19
20
6. When wet vacuuming, the floating safety
valve closes when the maximum tank level is
reached. In doing so, the suction noise of the
vacuum will change and become louder.
When this happens, you must switch off the
vacuum and empty the tank.
7. To empty the tank, firstly ensure you are in an
area where you plan to disperse the waste
water.
8. Open the drain screw by turning it
anticlockwise and then drain the liquid from
inside the tank.
Automatic Mode using the Wet and Dry
Vacuum with an AC / electric power tool
or other product.
The Wet and Dry Vacuum includes an AC outlet
socket for use with an AC / electric power tool
or other device that you want to activate the
vacuum with while the tool is in operation.
The main purpose of using this function is for
dust extraction from electric power tools.
The AC outlet socket will only operate on tools
that have an AC power requirement of 80-1200
Watts and only using one tool connected at a
time.
Product (example): Watts:
Drill / Hammer Drill
80W-1200W
Table Saw
80W-1200W
Circular Saws
80W-1200W
Bench Drills / Drill Press 80W-1200W
Mitre Saw
80W-1200W
To establish the power draw of your AC /
electric power tool, refer to the rating / technical
label on the tool.
WARNING:
Check the tank regularly and empty the waste collected when it is
about 2/3 full.
