Toolots HU1000-K, Инструкция по эксплуатации

Страница: 8 / 18

7
7.Service INSTRUCTIONS
■
Do routine check of fasteners, packing and oil leaking.
■
Do routine check of the function of the lift table.
■
Before service the lift table, make sure to turn off the AC power supply.
■
After service it is necessary to check the function of the lift table again.
■
ONLY a qualified personnel can do service work.
■
Do routine check of the micro-switches on the safety guard.
■
Do routine check of the hydraulic system by listening its noise, touch
motor’s surface.
Caution:
It is necessary to turn off the AC power supply before touch
motor’s surface.
■
Pay attention to clear or even replace the oil filter after operating for a
long time.
■
Appropriate lubrication is necessary to make the lift table work easily
and have a prolonged service life.
■
Following table is recommended to service the lift table periodically.
Content
After every 500
hours’ working or
every 3 months later
After every 2000
hours’ working or
every year
Check oil level of oil tank
☆
Check the cleanliness of oil filter
☆
Fasten all the connecting parts again
☆
Check wear and tear of pressure oil pipes
☆
Check hydraulic cylinder
☆
Fix main parts tightly again
☆
Check the function of micro-switches
☆
Check whole working state of the lift table
☆
Lubricate all the joints and pivot points
☆
Check wear and tear of all axial bushes
☆
Replace hydraulic oil for the first time Accumulated working ten hours’
Replace hydraulic oil
☆
Check oil leaking
☆
Remark:
☆
stands for proceeding the item.