1
3
(redeployment saw blade to cut back with a
round-edge line from the 1-mm air for good) see figure 12, and then tighten the 3
screws to prevent loosening.
Figure 11 Figure 12
(13). Cover the Drive Band wheel and Idler Band wheel.
(14). The choice of saw blade speed
Saw blade speed is adjustable four grades,
1023 5/8
、
1614 11/64
、
2047 1/4
、
2913 25/64
, see
the reference in Table 7 and 8. Chose suitable cutting speed according to the material
and nature of work piece. In order to upgrade the saw blade life, may choose to use
low 1-2 stalls cutting speed.
4.
transform saw blade speed:
(1).Turn off the power switch, open wheel cover.
(2).Loosen locking nut of Motor Block.
(3).Selected the cutting speed, and exchange the location of texrope.
Tension Block
Bean Board
Driven Gear
Deviation Adjustment Screw
Tension Block
Hexagon Socket-head
Hollow Bolt
Bean Board
Driven Gear
0.5-0.8°
Cap Screws
Space of Blode Baoke
and Sawing Wheel Plane1-2mm
Fixed Vise
L-Square
Saw Blade
