Toolland TC78023, Руководство пользователя

Страница: 4 / 22

TC78023
V. 01
–
30/05/2016 4 ©Velleman nv

Never use this appliance in a bathroom.

Make sure that no one can touch the device with wet hands.

Always disconnect mains power when device not in use or when servicing or maintenance activities are
performed.

DO NOT disassemble or open the cover. There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts

Handle the power cord by the plug only.

Check the cable before every use.

Do not use the device when damage to housing or cables is noticed. Do not attempt to service the device
yourself but contact an authorised dealer or service agent.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.

This device is not equipped with a thermostat that turns off the heater when the desired temperature is
reached.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
4. Features

horizontal and vertical stand

3 heat settings (fan only / 1000 W / 2000 W)

adjustable thermostat

carrying handle

overheat protection
5. Installation
Install the device on a flat, stable and non-slippery surface, away from inflammable materials.
6. Operation
6.1 General Operation
1. Connect the device to the mains.
2. Turn the knob to the desired position:
o
fan without heating (*)
o
low power (
●
)
o
high power (
●●
)
3. Switch off after use by turning the knob to the 0 position:
6.2 Thermostat
Turn the thermostat knob to the desired position. Once the room has reached the same temperature, the
device will automatically switch to stand-by and switch on again to heat.
7. Cleaning and Maintenance
7.1 Cleaning

Always disconnect the device from the mains and let it cool down completely prior to cleaning.

Do not touch the heating element with bare fingers.

Never immerse the device in water or any other liquid.

Occasionally clean with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents
or strong detergents.
7.2 Maintenance

Any maintenance or repairs including replacing the bulb element should only be carried out by a qualified
technician.