Toolland TC 78050, Инструкция по эксплуатации

Страница: 12 / 14

TC 78050 English
Toolland | www.toolland.be 12

Plug in the appliance.

Turn the thermostat to maximum.

Turn on the heater:
- Switch 1 = 750W
- Switch 2 = 1250W
- Switch 1 + 3 = 2000W

When the heating elements are switched
on the lights will be illuminated.

When the desired temperature has been
reached, the thermostat knob should be
turned slowly anti-clockwise until a click
of the thermostat is heard. The
thermostat will keep the temperature
from now on.

When the temperature declines the
thermostat will be switched on
automatically until the desired
temperature is reached again.

To switch off the appliance you must put
the thermostat on 0 and switch off the
switches. Always unplug the appliance.
TURBO
The appliance is equipped with an internal fan
that can be switched on independently of the
heating elements. With this you can circulate
the heat much faster in the room.
OVERHEATING PROTECTION
The internal overheating protection will be
activated automatically when the appliance is
overheated. In this case you must unplug the
appliance. After a period of cooling down you
can use it again. When the overheating
protection is activated for several times you
must contact your local dealer.
TECHNICAL DATA
Voltage 230
Frequency 50
Power 2000W
Positions 3
Turbo fan Yes
Thermostat Yes
Overheating protection Yes
Dimensions 584x200x418mm
Warranty 2 year
MAINTENANCE

Before cleaning, unplug the appliance.
Never use water for cleaning.

Use a moist rag for cleaning.

Do not immerse the appliance in water.

Do not touch the appliance immediately
after it has stopped working. It could be
very hot.
ENVIRONMENT
Should your appliance need replacement
after extended use, do not put it in the
domestic waste but dispose of it in an
environmentally safe way.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.