@ToolkitRC 2019
9
Main interface
After booting, the system counts into the main
interface, as shown below:
The dial on the left is a current display with an
accuracy of 10 mA and a maximum acquisition
current of 150 amps.
The middle histogram is the power display in
watts.
The 20.0ms and 1000us on the right side are the
period and pulse width of the output PWM signal.
The period cannot be changed, and the pulse width
is controlled by the knob.
The 11.2V on the right is the input voltage in
volts.
The 0mAh on the right is the capacity
accumulation. The unit will change with the size of
the capacity. Less than 1 ampere, the unit is mAh.
Otherwise it is ampere.
