@ToolkitRC 2020
13
3，Mode
Move the cursor to “Mode” and press [OK] to
modify the work mode, as shown in the figure below.
Lipo, LiHV, LiFe, and Lion batteries can be charged
and stored. NiMh, battery and PB battery can choose to
charge. Short press [OK] and [CH/Exit] to take effect,
and return to the previous interface.
4，End voltage（TVC）
Move the cursor to “End Voltage” and press [OK] to
modify the end voltage of the single-cell battery. When
the working mode is charging, it is the charging cut-off
voltage, and the range is plus or minus 50mV of the full
voltage. When the working mode is discharge, it is the
discharge cut-off voltage. Scroll [Scroll Wheel] to adjust
the value, step 0.01V.
