Toolex Industrial 595185, Инструкция по эксплуатации

Страница: 3 / 12

Page 2
Ⅰ
.Configuration diagram
II. Main technical parameters
：
Model 595185
Capacity kg 300/500
Max. lift height H mm 900
Min. height of table h mm 280
Table size mm 815 × 500 × 50
Handle height A mm 996
Overall length B mm 942
Foot pedal cycles to max. height ≤ 32/ ≤ 45
Wheel diameter D mm 127
Working volume of oil cylinder ml 164
Oil capacity ml 250
Service weight kg 75/85
noise level dB <70
III. Scope of application
：
SP series table lift truck is a kind of high-lift transportation tool which is applicable for short-distance transportation as well as goods lifting and
lowering. Besides, it can also be used as station facilities for workshop.
IV. Operation condition:
1. Lift table should be operated on solid and flat ground
；
2. Operation temperature: -20-40C°.
V. Notes (warning)
：
1. Read the instruction carefully before operation and get to know the performance and operation requirements of the lift table. And the hydraulic lift
table can’t be used unless it is authorized.
2. Do not overload the hydraulic lift table and operate it within the rated load. Overloading will cause damage to the hydraulic lift table and human
body.
3. It is forbidden for operators to stand or sit on the table to work.
4. Don’t put the hands or feet under the lowering table.
5. Please brake the truck when loading goods to prevent it from moving.
6. Off-set loading is forbidden when loading goods, and the goods should be distributed uniformly on the whole table.
7. Loose or unstable goods are not permitted to be loaded.
8. Don’t put goods on working table for a long time.
9. The truck can’t be moved when goods are being lifted.
10. The truck can only be moved on flat and hard ground, it is forbidden to be used on sloping ground or rugged ground;
11. When putting goods on table which has been hoisted, the weight of goods should be within rated load, and the goods should be loaded lightly.
(Safety valve only works in hoisting process, if the truck has been hoisted, and then put overweight goods on it, the safety valve can’t work. In
this way, the truck may be damaged.)
12. When loading and unloading goods on hoisted table, don’t drag goods in cross direction, which may cause serious off-set loading and make truck
turn over.