Toolex 595951, Инструкция по эксплуатации

Страница: 6 / 15

Page 6
6. FUELLING
MOTOR FUEL: MIX THE PETROL AND OIL
Conditions Petrol : Engine Oil
Work within 20 hours 20:1
Work after 20 hours 25:1
1. Use fresh unleaded petrol. You must use 100% synthetic oil specifically made for heavily
stressed two stroke engines.
2. Mix the petrol and oil in an approved container. Never mix fuel directly in the fuel tank.
3. Place the machine upright on the ground or on a sturdy bench and wipe any debris from
around the fuel cap.
4. Unscrew the fuel tank cap and pour the mixture into the tank with the aid of a funnel.
5. Be careful not to spill any mixture. If this happens, wipe the spill with a clean rag.
6. Start the engine at least three metres away from the area where the fuel tank has been filled
up in order to avoid any risk of fire.
Danger of fire and burn injuries.
• Always use extreme care when handling fuel! Fuel is highly flammable.
• Never attempt to fuel the machine if the fuel system components are damaged or are leaking.
• Never attempt to refuel the engine while it is running or still warm, allow it to cool before
fuelling.
• Never smoke or light any fires near the machine or fuels.
• Always transport and store fuels in an approved container.
• Never place flammable material close the engine muffler.
Fig 4.