directed at persons, live electrical equipment or the appliance itself.
•
Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
•
Risk of explosion – Do not spray flammable liquids.
•
Disconnect from the electrical power supply before carrying out user maintenance .
•
High pressure cleaners shall not be used by children or untrained personnel.
•
To ensure appliance safety, use only original spare parts from the manufacturer or approved
by the manufacturer.
•
WARNING
: The machine shall be disconnected from its power source during cleaning or
maintenance and when replacing parts for mains operated machines by removing the plug
from the socket-outlet;
•
WARNING
: High pressure hoses, fittings and couplings are important for safety of the
appliance. Use only hoses, fittings and couplings recommended by the manufacturer.
•
Do not use the appliance if a supply cord or important parts of the appliance are damaged,
e.g. safety devices, high pressure hoses, trigger gun.
•
WARNING
: If an extension cord is used, the plug and socket must be of watertight
construction.
•
WARNING
: Inadequate extension cords can be dangerous.
•
This high pressure washer must not be used at temperatures below 0°C.
WARNING!
•
Cord on drums should always be completely unwound to prevent the cord from overheating.
- If an extension cord is used, the plug and socket must be of watertight construction.
•
Inadequate extension cords can be dangerous.
•
Comply with the below-mentioned requirements for length and cord dimensions.
1.5 mm
²
max. 10 m
2.5 mm
²
max. 15 m
•
Power cord connections should be kept dry and off the ground.
If the power cord is damaged, it must be replaced by the manufacturer or his service agent or
similarly qualified person in order to avoid a hazard. Always keep the machine on a stable and
flat surface during operation, handling, transportation and storage. Sudden overturn of machine
will cause injury to body.
In the event of accident or breakdown, switch off the machine immediately. (e.g. contact with
detergent: rinse with an abundance of clean water)
WARNING!
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment-grounding conductor can result in a risk of electrical
shock. Check with a qualified electrician or service person if you are unsure if an outlet is
properly grounded. DO NOT modify the plug provided with the appliance to fit an outlet, have a
proper outlet installed by a qualified electrician.
Mains power connection
The following should be observed when connecting the high pressure
washer to the electric installation:
•
The electric installation shall be made by a certified electrician.
•
It is recommended that the electric supply to this appliance should include either a residual
current device that will interrupt the supply if the leakage current to earth exceeds 30mA for
30ms.
IMPORTANT! Only use water without any impurities.
If there is a risk of running sands in the inlet water (i.e. from your own well), an additional
filter should be mounted.
Safety devices
•
The unloader valve can reduce pressure if it exceeds pre-set values. The spray gun features
a locking device. When the locking lever is activated, the spray gun cannot be operated.
Thermal sensor:
A thermal sensor protects the motor against overloading. The machine will restart after a few
minutes, when the thermal sensor has cooled.
4. NAME OF PARTS: (FIG. 1)
1. Handle
4.Water inlet nut
7. Spray gun
2. Screw
5. Detergent bottle
8. High pressure hose
3.Wheel
6. Hose hook
9. Spray lance
5. PRODUCT DESCRIPTION
PURPOSE
•
The high pressure cleaner is designed to clean vehicles, machines, buildings, facades, etc.
in the private sector.
AREAS OF APPLICATION
•
Never use the machine in potentially explosive areas under any circumstances!
•
The operating temperature must be between 0 and +40º.