3
Operating Instructions
Precision Electric Screwdriver Set
Item no: 2372096
1 Intended use
The product is an electronic precision screwdriver with LED light. It has a rechargeable bat-
tery and is recharged through a USB-C
®
port.
Contact with moisture must be avoided under all circumstances.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
■
24x screwdriver bits
■
USB type-C
®
to type-A charging cable
■
Magnetize/demagnetize tool
■
Plastic pry tool
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appli-
ance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Li-ion battery
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable bat-
tery might cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or
the product into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
■
Never charge the rechargeable battery of the product unattended.
■
When charging, place the product on a surface that is not heat-sensitive. It is normal that
a certain amount of heat is generated during charging.
5.5 Operation
■
Risk of fatal electric shock! Never touch live electrical components or parts. Always
switch the power OFF first!
■
Touching capacitors (or similar components) or leads/cables that are connected to capa-
citors may cause a fatal electric shock! Capacitors may stay charged for several hours
after you switch off the power supply!
■
To prevent ESD (electromagnetic discharge) damaging sensitive electronic components,
it is recommended to install a grounding system designed for low voltage dissipation. For
example: ESD wrist strap, grounding mat, grounding workbench, or similar.
6 Recharging
■
Recharge the product when the performance drops.
■
To recharge the battery, connect one end of the charging cable to a power supply and
the other end to the USB-C
®
input on the product.
■
Charging status light: white (charging), green (fully charged).
7 Operation
■
If needed, use the magnetizer/demagnetizer tool to stroke the bit. Observe the markings
on the tool.
■
If the electric motor does not supply enough torque to remove the screw, remove it
manually.
Insert a bit
Press to
screw
Press to
unscrew
Press to
switch the LED
ON/OFF.
8 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
9 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product (KS-882037) conforms to the following directive(s):
■
Machinery Directive 2006/42/EC
■
EN 62841-1:2015
■
EN 62841-2-2:2014
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration
of conformity in the available languages.
