This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
*1662856_1662857_v4_0219_02_DS_m_4L_(1)
Product overview
1
9
2
3
4
7
6
5
8
1 Desk clamp
2 LED light
3 Glass lens
4 Glass lens cover
5 On/off switch (hidden)
6 Brightness switch (for item no. 1662856)
7 Swan neck (for adjusting the magnifying
glass)
8 Arm (for adjusting the light)
9 Socket for power adapter
Installation
Never place the product in the vicinity of flammable materials (e.g. curtains or decorative
material). This may cause a fire (e.g. when using the lamp while soldering). Keep the
product out of the reach of children. Children may knock the lamp over and sustain
injuries. Never cover the lamp when it is in use. Never place the lamp on an unstable
surface, otherwise it may fall over and cause injuries.
• Remove the magnifying lamp from the packaging and secure it to a level, sufficiently hard surface (e.g. a
suitably thick table top or window sill). Ensure that the surface attached to the desk clamp has parallel
edges. The desk clamp must not be attached to desks with chamfered or tapered edges.
• Use the arm (8) to adjust the lamp head to the desired position. You can fine tune the horizontal position
with the swan neck (7).
Operation
a) Connecting the power adapter
• The magnifying lamp is powered by the power adapter provided.
• Plug the low-voltage power-in plug on the power adapter into the power adapter socket (9) on the side
of the lamp.
• Plug the power adapter into a standard mains socket connected to the public grid.
b) Using the magnifying lamp (item no. 1662856)
• Press the on/off switch (5) to turn the magnifying lamp on. Press the switch again to turn the lamp off.
• Press the brightness buttons (6) to adjust the brightness of the LED lamp (2).
- "
+
" button: Increases the brightness
- "
-
" button: Decreases the brightness
Avoid touching the lens with your fingernails or other sharp objects.
c) Using the magnifying lamp (item no. 1662857)
• Switch on the magnifying lamp with the on/off switch (5).
- Position "
O
": Lamp is switched off
- Position "
I
": Lamp is switched on
Avoid touching the lens with your fingernails or other sharp objects.
Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Remove loose particles from the lens with clean compressed air, and then wipe off any remaining residue
with a soft lens brush.
• Clean the surface of the lens with a lens cloth or a soft, lint-free cloth. To remove fingerprints and other fat
residues, the cloth can be moistened with water or lens cleaning solution. Do not use rough or fluffy cloths.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
housing or stop the product from functioning properly.
• Avoid excessive cleaning and applying too much pressure to the housing and lens.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste. At the end
of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.
Technical data
a) Item no. 1662856
Magnifying lamp
Operating voltage ........................................24 V/DC
Protection class ...........................................III
LED quantity ................................................72
Clamp type ..................................................Table clamp
Dimmable ....................................................Yes
Energy efficiency class ................................(A++ to E)
Power ..........................................................12 W
Lamp colour .................................................White
Type of light source: ....................................SMD LED
Light colour ..................................................6000–7000 K
Luminous flux per light source (lumen) ........750 lm
Lens material ...............................................Glass
Lens size .....................................................Ø 150 mm
Refractive power ..........................................3 dpt
Magnification factor .....................................1.75 x
Operating/storage conditions ....................... -10 to +40 °C, ≤95 % relative humidity (non-condensing)
Weight .........................................................3.02 kg
Power adapter
Input voltage / current ..................................100–240 V/AC, 50/60 Hz
Output voltage/current .................................24 V/DC, 0.6 A
b) Item no. 1662857
Magnifying lamp
Operating voltage ........................................21 V/DC
Protection class ...........................................III
LED quantity ................................................56
Clamp type ..................................................Table clamp
Dimmable ....................................................No
Energy efficiency class ................................(A++ to E)
Power ..........................................................8 W
Lamp colour .................................................White
Type of light source .....................................SMD LED
Light colour ..................................................6000–7000 K
Luminous flux per light source (lumen) ........600 lm
Lens material ...............................................Glass
Lens size .....................................................Ø 127 mm
Refractive power ..........................................3 dpt
Magnification factor .....................................1.75 x
Operating/storage conditions ....................... -10 to +40 °C, ≤95 % relative humidity (non-condensing)
Weight .........................................................2.52 kg
c) Power adapter
Input voltage / current ..................................100–240 V/AC, 50/60 Hz
Output voltage/current .................................21 V/DC, 0.35 A
