Operating Instructions
Safety Goggles
Item No. 1781067 / 1781072
Safety Spectacles
Item No. 1781068 / 1781069 / 1781070 / 1781071 / 1763882
Intended Use
This product is intended for use as protective eyewear and should be selected according to
any identified eye injury hazard(s), and applicable to relevant occupational health and safety
regulations.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Protective eyewear
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads
or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The product is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
•
Clear eyewear offers no protection against glare from the sun.
•
It is advised that this eyewear should not be worn over prescription frames, as
there is the possibility that any impact may be transmitted to the prescription
frame creating a hazard for wearer.
•
No parts on this eyewear are replaceable or interchangeable. If any part of the
eyewear is deemed unfit for use then the whole product should be discarded.
•
If wearing a respirator, make sure eyewear does not interfere with the fitted seal.
•
The material used in the constructing of this product is hypo-allergic, but it is
possible an allergic reaction may be experienced by susceptible individuals. In
the case of a reaction, the user should remove the product and seek medical
advice from a qualified doctor.
•
Always inspect eyewear before each use! Damaged or dirty eyewear limits
protection and can reduce vision. If necessary, equipment should be cleaned,
repaired or replaced before use.
•
Eye protection should be suitable for and sufficient enough for the hazard and
risk identified in the task(s).
•
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*1763882_1781067-9_1781070-2_v5_0420_02_dh_m_en
Comfort and Fit
Protective eyewear should fit well. Safety spectacles and goggles should fit with the
bridge properly supported on your nose.
The center of the lens should line up with the front of your eyes, with the frame being
as close to the face as possible.
Cleaning and Storage
•
Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as they
can cause damage to the housing, lens, or impair functionality.
•
Rinse using lukewarm water, then gently wipe dry using a soft non-abrasive fibre cloth.
•
Store clean eyewear in a closed container protected from dust, moisture or damage.
Technical Data
a) General
Viewing glass ................................ Transparent
Material
......................................... Polycarbonate
Optical class .................................
1
Side shielding
............................... Yes
Product life ....................................
Max. 2 years
Operating conditions .....................
-5 to +45 ºC, 40 – 80 % RH
Storage conditions
........................
5 to +35 ºC, 40 – 70 % RH
Item No.
Dimensions (L x W x H)
Weight
1763882
140 x 45 x 53 mm
22 g
1781067
160 x 80 x 76 mm
66 g
1781068
160 x 55 x 70 mm
40 g
1781069
140 x 70 x 43 mm
21 g
1781070
150 x 52 x 55 mm
31 g
1781071
145 x 55 x 47 mm
21 g
1781072
195 x 75 x 85 mm
150 g
b) Standards and Protection
Item No.
Standard(s)
Protection
Class
UV Filter
Ocular
1763882
EN166:2001, EN170:2002
FT
2C-1.2
Clear
1781067
EN166:2001
B
-
Clear
1781068
EN166:2001, EN170:2002
F
2C-1.2
Clear
1781069
EN166:2001
F
-
Clear
1781070
EN166:2001 EN 170:2002
F
2C-1.2
Clear
1781071
EN166:2001, EN170:2002
F
2C-1.2
Clear
1781072
EN166:2001, EN170:2002
B
2C-1.2
Clear
Declaration of Conformity
Protective eyewear complies with the requirements of the regulation EU 2016/425 by means
of the European Standard EN166:2001 “Personal eye-protection — Specifications”.EU – Type
certification issued by: CERTOTTICA Scrl (notified body: 0530) – Zona Industriale Villanoval –
I - 32013 Longarone BL- Italy.
Declaration of Conformity download: www.conrad.com/downloads
