19
c) Persons and product
•
Do not cover or fasten any items to the soldering station, as this constitutes a fire hazard.
• Do not remove soldering residue from the soldering tip by tapping on the housing of the soldering station,
as this may damage the soldering iron (heating element) and soldering station.
• The soldering iron must not get damp or wet. If you wish to use a damp sponge to wipe the soldering tip,
it must be inserted into the corresponding opening on the soldering iron holder.
• Never use the soldering iron to heat up liquids.
• If you do not plan to use the product for an extended period (e.g. storage), unplug the mains socket to
disconnect the product from the power supply.
• Store the product in a secure place out of the reach of children.
• Always comply with the accident prevention regulations for electrical equipment when using the product
in commercial facilities.
d) Occupational safety
• Never solder live electrical components or parts. Always disconnect these components from the power
supply beforehand.
• Caution! Touching or soldering capacitors (or similar components) or leads/cables that are connected
to capacitors may cause a fatal electric shock! Capacitors may stay charged for several hours after you
switch off the power supply!
•
Depending on the workpiece or soldering method, the workpiece must be fixed in place with a suitable
clamping device. This enables you to use both hands for the soldering process.
• Keep your workstation clean.
•
Ensure that there is sufficient lighting.
•
Ensure that there is sufficient ventilation when soldering. Solder and flux vapours can be harmful to
your health.
• Wash your hands thoroughly after working with solder. This is particularly important when using lead-
based solder.
• Do not put solder into your mouth or eat or drink when you are soldering.
• Wear suitable protective clothing and safety goggles when soldering.
• Liquid/splashing solder may cause serious burns or eye damage.
•
Never use soldering flux, acid or similar aids when soldering. These materials can cause bad soldering
joints and may damage the soldering tip. For best results, use a solder wire with a flux core.
• When soldering, do not touch any part of the soldering iron except the handle, otherwise you may burn
yourself!
•
Always solder on non-flammable surfaces. Ensure that there are no neighbouring materials that may be
damaged by the heat generated from the soldering iron.
• Always place the hot soldering iron in the holder when it is not in use.
•
Improper use may cause a fire. Do not use the appliance in areas with flammable or explosive substances.
