Tool Shop 241-9946, Руководство пользователя

Страница: 13 / 18

13
WARNING:
Always wear safety goggles
or safety glasses with side shields when
operating your sander. Failure to do so could
result in foreign objects being thrown into
your eyes resulting in possible serious eye
damage.
Always wear an appropriate dust mask and
hearing protection when using your sander.
ON/OFF SWITCH
To turn the switch ON, press the right hand side
of the ON/OFF switch (1) (Fig. 6). To turn the
switch OFF, press the left hand side of the
ON/OFF switch (2).
SANDING
Clamp or otherwise secure your workpiece to
prevent it from moving under the sander while
being sanded.
WARNING: An unsecured workpiece
could be thrown toward the operator causing
injury.
Place the sander on the workpiece so that the
complete sandpaper surface is in contact with
the workpiece. Turn the sander ON by pressing
on the side of the ON/OFF switch. Move the
sander slowly over workpiece making
successive passes in parallel lines, circles or
crosswise movements. Because the orbital
motion of the sanding pad moves in tiny circles,
it is not necessary to move the sander with the
grain or in the same direction for successive
passes (Fig. 7).
!
For safety reasons, the operator must
read the sections of this Owner’s
Manual entitled "GENERAL SAFETY
WARNINGS", "POWER TOOL SAFETY",
"SPECIFIC SAFETY RULES",
"GUIDELINES FOR EXTENSION
CORDS" and "SYMBOLS" before using
this pad sander.
Verify the following every time the pad
sander is used:
1. Sander cord is not damaged.
2. Safety glasses and dust mask are
being worn.
3. Hearing protection is being worn.
4. Sandpaper is the correct type for
the job.
5. Sandpaper is in good condition and
is properly installed.
Failure to observe these safety rules will
significantly increase the risk of injury.
WARNING
!
ASSEMBLY AND OPERATING
Fig. 6
!
Fig. 7