5
OPERATION MANUAL
www.thetoolshed.co.nz
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow
instructions and warnings could lead to serious injury, electric shock or fire. Save ALL warnings and
instructions for future reference.
ELECTRICAL SAFETY
-
Do NOT use the power tool in raining conditions or wet areas where the power tool could
get wet.
Water in the power tool can lead to electric shock.
-
Only use the power tool when the plug correctly matches the power outlet.
Modifying
plugs greatly increases the risk of electric shock.
-
Keep the power cord away from anything that could damage it such as sharp edges,
moving parts or heat.
A damaged power cord increases the risk of electric shock.
SPECIFIC SAFETY INSTRUCTIONS
-
DO NOT touch the mains plug with wet hands. Always disconnect the mains plug by pulling
the plug and not the cable.
-
During operation for swimming pools, garden ponds and similar places, the appliance must
be equipped with a residual current device (RCD).
-
DO NOT kink, crush, drag or drive over the mains cable; protect against sharp edges, oil, and
heat.
-
Extension cables must not be used.
-
Disconnect the mains plug before all work on the device.
-
DO NOT install and switch on the appliance if there are people or animals in the medium
being pumped (e.g., a swimming pool), or they are in contact with it.
Repairs must be carried out by a qualified electrician. If repairs are carried out incorrectly, there is a
danger of liquid penetrating into the electrical components of the appliance.
SERVICE
-
Have your tools and machinery serviced with ToolShed replacement parts.
This will ensure
that the safety of the power tool or machine is maintained.
