TOOL FRANCE TF-32TE, Руководство оператора

Страница: 27 / 39

24
ASSEMBLY
4. Position the base on floor. Fix the column assembly to base using hex bolts
5. Slide the table assembly with gear rack onto the column.
Fix the gear rack using the column collar.
6. Install table and vice adjusting handle. Fix them by tightening the screws.
4. Install head assembly
4.1. Carefully lift the head above the column and slide it onto the column
Make sure the head slides down over the column as far as possible.
Align the head with the base.
4.2. Using the hex wrench, tighten the set screws in the left or right side of head.
Set screw
Column collar