CV1102-HTS User Manual
8
DBG ON/OFF
Set Debug Mode On Or Off
9
BEEP ON/OFF
Set Onboard Beep On Or Off
10
LCD ON/OFF
Set LCD Always On Or Auto Turn Off In Power On State
11
RESET
Reset System To Default Setting (Should Type "Yes" To
Confirm, "No" To Discard)
12
IR232 vv
Set IR And RS232 Connect To Remote Valens RX/TX
vv=OFF: Disconnect With Valens
vv=RRX: Remote Valens RX
vv=RTX: Remote Valens TX
vv=BOTH: Remote Valens RX and TX
13
OUT xx FR yy
Set OUTPUT:xx From INPUT:yy
xx=00: Select All OUTPUT Port
xx=[01...02]: Select One OUTPUT Port
yy=[01...04]: HDMI Input 01 ~ 04
yy=HDBT: HDBT/Valens Input
yy=AV: AV Input( Output 02 Only )
yy=YPBPR: Component Input( Output 02 Only )
yy=VGA1...VGA4: VGA Input( Output 02 Only )
14
OUT BYP ON/OFF
Set HDMI Input Signal Through Scaler or Bypass
15
OUT SP/MX
Set OUTPUT To Splitter or Matrix Mode
16
OUT RES rr
Set Scaler Output Resolution (Change Output Resolution Will
Effect EDID Setting)
rr=01: 1080P@50Hz
rr=02: 1080P@60Hz
rr=03: 720P@50Hz
rr=04: 720P@60Hz
rr=05: 1280x1024@60Hz
rr=06: 1024x768@60Hz
rr=07: 1360x768@60Hz
rr=08: 1440x900@60Hz
rr=09: 1680x1050@60Hz
17
OUT FREQ mm
Set Output Frequence Mode (When Output Resolution is
1080P or 720P)
mm=AUTO: Set Output Freq Auto Change To Input Freq
mm=FORCE: Set Output Freq By CMD:OUT RES rr Select
18
AUD SCA ORG
Scaler Audio Input Follow Port Selection
19
AUD SCA ANA
Scaler Audio Input From Analog L/R Signal
20
AUD HDMI yy ORG
HDMI Input:yy Use Orginal HDMI/DVI Signal
Signal yy=[01...04]: HDMI Input 01 ~ 04
21
AUD HDMI yy ANA
HDMI Input:yy Embeded Analog L/R
Signal yy=[01...04]: HDMI Input 01 ~ 04
Tonlyware Technology Inc. Contact: [email protected]
12
