TONGHER TECHNOLOGY CO.,LTD
- 7 -
Shenzhen
∙
China www.tonghertech.com
LCD Definition
1)
ID zone number: can be modified by the button(ID), from 1-16.
2)
Power supply : mains and battery are available
: mains with power adaptor
: Battery working state , empty – full
Full of energy
Less than DC12V
Low battery warning with beeping every 3 seconds
Battery empty, disarming with every 3 seconds,and (9) real-time voltage will display U
3)
Alarm output / Mute :
Once the energizer alarm is triggered, this icon will be flashing,with alarm output.
Mute by keypad or pc software
4)
Alarm input/Gate contact
Flashing if Alarm input (such as gate magnetic contact other sensor),
Nc Alarm input/Gate contact is closed. Push VOL button for over 5 seconds.
5)
Remote control
Remote control module is available
C: Arming(Activating) the energizer
B:Disarming(Deactivating) the energizer
A: Fence alarm output (siren and strobe) not bypass
D: Fence alarm output (siren and strobe) bypass (Mute)
6)
Keypad control
RS485 keypad control module is available
7)
PC Software control
RS485 computer software control is available
8)
SMS(mobile message)
mobile message management is available
9)
Real-time voltage
U:disarming , energizer Deactivated
E1 : Internal faults detected 1(refer to manufacturer/reseller)
E2 : Internal faults detected 2(refer to manufacturer/reseller)
10)
Voltage setting value: be modified by the button VOL (0/2/5/8/10KV)
11)
Working state : alarm state
C :Cut off (Break) alarm
