TonerRefillKits ReChargX RX201A Скачать руководство пользователя страница 5

TonerRefillKits.com

  

RechargX™ RX201A v1

Mon - Fri  8am - 5pm ET                     

© 1995-2011 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the  

2011.12.21

800.527.3712 or 352.343.7533                 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved. 

Page 5 of 10

Step  8:  Clean  the  Area  Around  the  Toner 

Hopper Hole Before Sealing

Unfold  the  yellow/orange  “toner  grabber”  cloth 

from the ReChargX™ RX201A Premium Print Toner 

Refill Kit and stretch it along both dimensions (it will 

stretch considerably in one dimension and not the 

other). Stretching the yellow/orange toner grabber 

cloth activates the toner retaining substance that is 

embedded within the cloth.

You will be using this cloth to clean the outside 

of  the  toner  hopper  hole  to  ensure  the  new 

hopper plug will be applied firmly and securely 

to the cartridge, as shown in figure 8.

NOTE:

 Only use the toner grabber cloth on the 

exterior of the toner cartridge around the toner 

hopper hole area.  Do not use the cloth to clean 

any of the internal components or the cartridge 

developer roller.

Step 9: Plug the Toner Hopper Hole

Remove  the  new  plug  from  your  ReChargX™ 

RX201A Premium Toner Refill Kit and place the 

plug over the hopper hole, press firmly around 

the entire perimeter of the plug to make certain 

the plug sits securely inside the toner hopper 

hole (figure 9). 

NOTE:

 Do not press hard enough for the plug 

to go through the hole and into the cartridge.

Step 10: Locating the Cartridge Gear  

End-cap

The final set of steps consist of resetting the 

toner cartridge flag gear. Resetting the gear 

is  essential  to  ensure  that  the  cartridge  is 

recognized by the printer as being full. Also, 

it  resets  the  voltage  bias  (this  eliminates 

light print).

To begin, turn the toner cartridge on its end, so 

that the cartridge gear end-cap is facing toward 

you, as shown in figure 10. (The opposite side 

from the fill cap).

Figure 8:

 Clean the area around the toner hopper hole

Figure 9:

 Reinsert the toner hopper plug

Figure 10:

 Orient the toner cartridge

Содержание ReChargX RX201A











Отзывы: