manualshive.com logo in svg

TonerRefillKits ReChargX RX077, Инструкция по эксплуатации, Страница: 7 / 7

Поделиться
Скачать
TonerRefillKits ReChargX RX077 Скачать руководство пользователя страница 7

TonerRefillKits.com 

 

RechargX™ RX077 v2

Mon - Fri  8am - 5pm ET                     © 1995-2011 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the  

2012.01.10

800.527.3712 or 352.343.7533                 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved. 

Page 7 of 7

Step 13: Clean the Area Around the Waste 

Toner Hopper Hole Before  

Sealing

After the waste toner has been removed from 

the waste hopper, use the yellow/orange toner 

grabber cloth to clean around the waste hopper 

hole, as shown in figure 14, so the ReChargX™ 

leak-proof seal will adhere to the cartridge body 

as completely as possible.

Step 14: Remove the ReChargX™ Seal 

 

from the Protective Backing

Remove  the  protective  backing  from  the 

ReChargX™  leak-proof  seal  (figure  15a) 

and lower the seal around the toner hopper 

hole.  Press  firmly  around  the  entire  seal  to 

ensure the seal securely sticks to the toner 

cartridge, as shown in figure 15b.

Congratulations – You’re Finished!

Congratulations! You have successfully refilled 

your Canon L50 (6812A001AA) toner cartridge 

and emptied the waste hopper.

Enjoy your savings. You’ve just saved $100.00 

by refilling your toner cartridge!

-End of ReChargX™ RX077 Instructions-

Customer Service / Technical Support

To further help your ReChargX™ RX077 Toner 

Refill  procedure,  we  are  always  ready,  willing 

and happy to answer any of your questions or 

comments via technical support.

Please  contact  us  at  352.343.7533  or 

800.527.3712 M - F 8am - 5pm ET.

Additionally,  you  may  also  chat  with  us  using 

Live Help on our website (M - F 8am - 5pm ET) 

or submit a technical support ticket at:

www.TonerRefillKits.com/Tech_Support.php

Figure 14

: Clean the waste toner hopper hole

Figure 15a

: Clean the waste toner hopper hole

 

Figure 15b

: Clean the waste toner hopper hole

Содержание ReChargX RX077








Отзывы:

Нет отзывов