ReChargX
™
RX350
8am - 5pm ET Mon - Fri
© 1995-2016 ReChargX, EmptyX, TonerRefillKits, TonerRefillKits.com, the TonerRefillKits logo, the
V2.00 - 2016.05.09
800.527.3712 or 352.343.7533
ReChargX and EmptyX logos are trademarks owned by TonerRefillkits.com, LLC. All rights reserved.
Page 6 of 15
A
B
Figure 8-1:
The standard-yield cartridge (end cap removed)
D
Figure 8-2:
After reemoving the reset spring; before removing
the reset gear
Figure 8-3:
After removing the reset gear; before removing the
drive gear
Preparing the standard-yield cartridge for refilling and resetting
D
C
Remove the components
Figure 8-1 shows the gear end of the standard-yield
toner cartridge with the end cap removed.
The components you will be removing (to be replaced
with the new components which came with the
RX350 toner refill kit to convert your cartridge into a
high-yield cartridge) are the drive gear (A), actuator
gear (B), reset gear (C), reset spring (D) and toner
hopper plug (E), which is located under the reset
gear and not visible in this figure.
Step 8a: Remove the reset spring
To begin the process of converting the standard-yield
into the high-yield, we start by removing the reset
spring (D) (Before: Figure 8-1; After: Figure 8-2).
Step 8b: Remove the reset gear
With the reset spring removed, you may now remove
the black reset gear (C) (Before: Figure 8-2; After:
Figure 8-3) which will expose the toner hopper plug.
C
D
