Tone T2MP13, Инструкция по эксплуатации

Страница: 21 / 28

－１９－
Torque Setting
② Measure the torque value with a torque tester.
③ Torque Setting
●When the first time set a torque value
Insert
Hex Key Wrench L-type
into the square hole of the end cap.
To increase the torque value measured in step ②,
turn the adjusting tool to the CW direction. To decrease,
turn it to the CCW direction.
(Caution) The torque wrench is setted around min. torque value at first.
●When change a torque value
Rid a supplied sticker attached to the end cap.
Insert
Hex Key Wrench L-type
into the square hole of the end cap.
To increase the torque value measured in step ②, turn the adjusting tool
to the CW direction. To decrease, turn it to the CCW direction.
① Prepare a torque tester.
●Use a setting tool with an accuracy of ±1% or below.