- 45 -
WARMING
●The torque wrench in the set, use in clockwise direction only.
Use ratchet wrench in the set for loosening.
○The torque wrench is only for tightening. Never use the torque wrench for
loosening operation.
Failure to following this instruction may result in malfunction and injury.
②Set the clutch according to the intended direction of the output drive as shown
below.
When rotate the output angle adjustor to the
left, set the clutch dial to the Left (L).
When rotate the output angle adjustor to the
right, set the clutch dial to the Right (R)
CAUTION
●Before starting the unit, check that the output angle adjustor
rotation direction and the clutch direction conform.
Incorrect use of the clutch may result in damage to the unit.
●Try to use several time as a warming up before use the
Super Power Wrench.
Without warming up, the wrench is not able to output torque stably.
