manualshive.com logo in svg

Tone Commander 6220T-TSG, Руководство пользователя

Поделиться
Скачать
Tone Commander 6220T-TSG Скачать руководство пользователя страница 47

44

Tone Commander 6220T-TSG User Manual

Setting the Time and Date   ________________

From the User Options menu, select CLOCK.
(

Setup

 

→

 USER

 

→

 CLOCK)

The current time and date will be displayed, with the cursor
flashing on the first digit.

Enter new digits for the date and time with the dial pad. The
cursor will advance automatically as each digit is entered.
Time must be entered in 12-hour format. AM/PM is changed
with a softkey.

If you need to make corrections, select 

Å

BKSP

 (backspace)

to move the cursor to the left.
The 

More

4

  

key moves the cursor to the right.

When all changes have been made, press the 

Done

 key to

return to the User Options menu or the 

Setup

 key to exit

Setup Mode.

Setting Up Speed Dial Keys   _______________

Speed Dial

 keys facilitate dialing for voice mail, auto attendant and

similar applications. If a Speed Dial key is pressed while connected on
an active call, the speed dial number is dialed on that call. Speed
dialing can be used in conjunction with manual dialing. Any unused
multifunction key can be designated as a Speed Dial key. Speed Dial
keys can also include network feature activator codes – this feature is
explained on page 30.

Speed Dial keys can be programmed with up to 24 digits including 0-9,
#, * and "Pause". The keys must be programmed at the terminal; they
are not set by a Parameter Download.

To add or change DSS keys, use the KEYS option in the Installation
Options menu (see page 29).

Done

04-27-99 11:16AM
|BKSP              AM/PM

Содержание 6220T-TSG











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды