2), the red light is bright when the charge is charged and the blue light is bright for about 2-3 hours when
the electricity is full.
3) this product can not be used when charging.
3
、
Pairing: (first use must be paired with a mobile phone first)
1) first confirm whether your mobile phone has a Bluetooth function (look at your handset instructions).
2) long press S3 key to red and blue light at the same time flashing two times at the same time, when the
headset sends out "Power on" sound, enter the pairing state.
3) use the Bluetooth function in the mobile phone to search the Bluetooth device, and you can find the
wireless and select the device to connect.
4
、
Instructions
：
1) boot: press the S3 button to the red and blue lights and flicker two times at the same time. After the headset
sends out the voice of "Power on", it will enter the pairing state and enter the standby working state.
2) answer the telephone: the headset hears the call prompt, according to the S3 key to answer the phone once, the
headset sends out a sound, and the blue light flashes in the call.
You can also listen to the phone by the phone on the phone, the headset gives a hint, and the red and blue lights flicker
quickly.
3) dial out the phone: in standby working state, double click the S3 key, and you can dial the last call.
In the standby working state, dial the telephone way by the mobile phone and the input number to call the phone.
4) end the call: in the call, to end the call, press the S1 key to end the call once, and the headset sends out a hint.
During the call, the other side hangs up the phone and the headset gives a hint. End the call automatically.
In the call, press the cell phone to break the key once, and the headset sends out a sound. End the call automatically.
5) volume increase / decrease: press the S1/S2 button to increase or decrease the volume, increase the volume
continuously and decrease the volume to the maximum and minimum volume, and the headset emit "biu\biu" prompt
tone.
6) the last one / the next: under the state of listening to the S1/S2 key, the S1 button is the upper one, the S2 button
is the next
5
、
Shutdown
When the S3 key is 3 seconds long, the headset sends out "Power off" sound and turns off.
6
、
Lack of electricity:
In the working state, when the red light is flashing quickly, the headset sends out a quick hint, indicating that the
electricity is insufficient, and the maximum is 60 seconds. Please charge it in time.
Mobile phone display also has the amount of battery tagging
7
、
Return:
When the phone has been connected to the headset, the phone will automatically connect to the phone when it
starts.
4
、
Common problem
When the 1. Red light is flashing quickly; the headset gives a quick hint.
It shows that the battery of the Bluetooth headset is not enough. Please recharge the earphones as soon as possible.
2. Can’t start
Maybe the headset is exhausted. Please recharge the earphone first and turn on the machine.
3. Recharge twenty minutes after the headset cannot turn on
The Bluetooth headset can be charged at least 40 minutes after it is charged. It is strongly suggested that the battery be
sufficient before use.
4. No instructions for charging
If the headphone battery is exhausted or does not charge for a long time, it will not be charged for a few minutes at first.
After a while, the red indicator will light up to indicate charging.
