- 06 -
- 07 -
Control panel
Chapter 3
Installation Guide
1. Install the brakes to correct position with the Hex wrench (M5 in the tool bag).
2.Install the handlebars, pay attention to the installation direction
.
Control instructions
1.Long press the power switch button to turn on the machine, and the front light, buttom atmosphere light, tail light, and brake light are all
on. The control panel shows the power and speed.
2.After turn on, the control panel display shows “1”, indicating that the speed is 1st gear. Press the button to change to 2nd gear; the
highest display is 3rd gear.
3.Press the button twice the front light is on and press the button twice the front light is off.
4.Press the button three times to display the total mileage, then press the button three times to display the speed.
5.When you use the brake, the brake light will get brighter.
6.Batter y status indicating: five lights are 100%, four lights are 50%, three lights are 30%, two lights are 10%, one light is less than 10%.
7.The scooter will power off automatically after 15 minutes without riding and operation.
Power switch
Speed
Batter y
Speed gear
Headlight status
Bluetooth status
