Pg. 11
Charging plug for 36 volt battery
Included with your new Tommy Bahama Electric
Bike is a lithium ion battery, along with a charger,
which plugs into a standard household electric
receptacle.
A lithium ion battery requires specially designed
chargers. You should never charge your battery
with a substitute charger that is not designed for
this use. Use of an unsuitable charger to charge a lithium ion battery could result in
over-heating, fire or even explosion.
The Tommy Bahama Electric Bike battery may be charged
while on the bike or removed and charged at a location away
from the Tommy Bahama Electric Bike. The battery is easily
removed by turning the key switch to the open/unlock posi-
tion, grasping the rear of the battery, and sliding the battery
to the rear of the Tommy Bahama Electric Bike.
To charge the battery, plug the charger into an AC outlet. The LED indication light
should be green showing the charger is working normally. Then plug the charger
into the charging port located on the bottom of the battery by sliding open the char-
ger cover (
Figure 1
).
Recharge the Battery
Figure 1.
Battery
Charger
The fuse is designed to protect the battery. If the fuse
blows, there will be no power to any of the electrical
components powered by the battery. You can replace
the fuse with a standard automotive 40 amp fuse or con-
tact Tommy Bahama Electric Bike customer service at
support@Tommy Bahama EBike.com.
The fuse is located on the bottom of the battery, between the
charging port and the On/Off switch (
Figure 2
).
Fuse
3
Figure 2.
