Tomey TCP-2000, Руководство пользователя

Страница: 18 / 50

Operation Manual
18
1.
Select ‘ Photopter ’, using Arrow Up or Arrow Down button.
2. Press Right Arrow to edit mode.
3. Use Up and Down Arrows to set edited parameter to ‘ Yes ’ or ‘ No ’ value.
4. Press Left Arrow to apply changes.
4.12. User defined programs - PROGRAM 1, PROGRAM 2,
PROGRAM 3.
TCP-2000 Chart Panel allows the user to define his own programs. Each program
is a sequence of up to 20 steps of charts, tests or eye anatomy pictures available
from the panel. Masks and colour filters can be used in combination with charts.
You can store 3 programs, each 20 steps long.
4.12.1. Programming Mode
To define your own program follow step 1 to 4:
1. Choose program you would like to edit using Arrow Up or Arrow Down.
2. Press Right Arrow to enter Programming Mode.
3. Now you can start building your program sequence. Select test you want
to add to current program (picture, tests or masks). To confirm your selection and
add step to the program press ‘
F1 ’ button. Device will signal with 1 beep signal
each properly added step of the program.
4.
Press ‘ F2 ’ after program step has been stored to end programming process
and store selected test into the memory of the chart panel.
Device will signal end of programming sequence with message ’
End of program ’.
Programming mode will be automatically finished and step sequence stored after
you excide number of 20 steps for the program.
You can enter Menu at any moment and change settings, e.g. children tests, chart
type, etc.
4.12.2. Executing user’s program
To execute user-defined program stored in device memory simply press ‘ F1 ’, ‘ F2 ’
or ‘ F3 ’ button. Chart Panel will automatically display first test chart of the program