Tomey MR-6000, Инструкция по эксплуатации

Страница: 63 / 70

8-5 ■
8.9 Declaration of Conformity to EMC
 When using specified accessories or cables excluding internal parts sold
as repair parts of Tomey Corporation, electromagnetic emission of the
MR-6000 may increase or electromagnetic immunity may decrease.
 When using handheld or portable communication equipment, locate it
more than 30cm(12inches) away from the MR-6000. It may degrade the
performance of the MR-6000 if the equipment is located closer.
 Do not use the MR-6000 adjacent to or stacked on other equipment. If it
needs to be adjacent to or placed on other equipment, it must be
confirmed that MR-6000 operates correctly in such location.
 The MR-6000 falls under Group 1, Class B according to EN 55011(CISPR
11). This means that the MR-6000 does not generate RF energy
intentionally in the form of electromagnetic irradiation, inductive
coupling and/or capacitive coupling for processing of materials or
inspection/analysis, and that it is suitable for use in facilities directly
connected to a low-voltage power network that supplies power to general
household facilities and buildings used for home use.
 The MR-6000 can be used in a specialized health care facility such as
hospitals and clinics (except anywhere near the source of a strong EMI)
and a general commercial facility such as eye glasses stores.
 The MR-6000 requires special attention for EMC and needs to be installed,
serviced and used based on the following information.
 Do not use cables other than those provided or specified by Tomey
Corporation.
 The person who connects additional equipment to the signal I/O section
as part of the medical system, shall take responsibility for ensuring the
system conforms to IEC/EN 60601-1-2 requirements.
Name Specification Length Note
AC code No ferrite core 2.0m Accessories
LAN cable Unshielded 3.0m Not accessories
USB cable Shielded 1.0m Not accessories
Essential performance ： Measurement function