6B Telescopic Footrest adjustment.
The Telescopic Footrest system provides easy adjustment of the users foot
position. If assistance is provided by a third part, adjustment can be carried out
with the rider seated. Adjustment is best done in conjunction with, or after
adjustment of the seating position. See sliding seat and Rotor Crank Head height
adjustment).
To adjust the Telescopic Footrests, slacken the camlock clamp. Rotate the knob
situated on the left side of the frame (beneath the seat) until the correct leg
length position is achieved.
Fully close the camlock so the handle is generally flush with the frame as
shown.Adjust the Camlock if necessary by rotating the thumbwheel clockwise to
tighten and vice versa to slacken. When adjusted satisfactorily, tighten the
clamp firmly.
Using the vehicle without a closed and properly adjusted clamp may cause damage
to the clamp or crank mechanism.
6C Sliding Seat.
The sliding seat has a smooth sliding front to back movement of 120mm. It is
used in conjunction with the adjustable handlebars to achieve a comfortable arm
"reach" for the user. To adjust the seat position, pull on the locking knob
beneath the left side of the seat and whilst holding the knob out, move the seat
to its desired position. Release the knob and check that it has relocked where
required.
| ROTOR MANUAL
PAGE | 8
