3
©2018 - TOMATIS DÉVELOPPEMENT S.A.
BT connection and pairing
1.
On your Talksup®-BT go to “Settings” and switch the
button from OFF to ON
.
2.
Enable pairing detection on your Tomatis® Bluetooth
Headphone (TOM01) by pressing and holding the
middle
button
until the light flashes red and green.
3.
Press on the
icon and then press on Analyze, wait
10sec.
4.
Press on your headphones address on the list and press
the grey round , the headphones icon should be blue
after a few seconds.
5.
Go back to the Start menu, select your day and start your
program.
If you want to pair 2 headphones, switch the number button
from 1 to 2
on the “Settings” menu, press on the
1st headphone address on the list and press on
(first
column).
Repeat the operation for the second headphones, pressing
on the second column. After a few seconds the two icons
should be blue
.
If the headphones disconnect during a session, press on
the Pause button, turn back on the headphones and press
on this icon
to re-pair the headphones
. Press play
again to continue the listening.
Once your session is over, do not forget to turn off the
TalksUp
®
-BT and the Bluetooth Headphone.
Please note:
If you own a regular Talksup® you will need a
bluetooth receiver (aptX) to use with the Bluetooth Headphone.
Содержание TOM01
Страница 1: ...USER MANUAL Bluetooth Headphone TOM01 ...
