7
• Residual Heat:
If the temperature of the cooking zone is still high (over
50°) after it has been switched off, the relative display will
indicate the symbol (residual heat). The symbol will
only switch off when the burn risk in no longer present.
• Quick heating / Booster function
(
Induction
zone):
Switching a single cooking zone OFF:
A single cooking zone can be switched OFF by directly
selecting cooking level “0”or through sliding down to“0”.
If a cooking zone is switched OFF but still hot the accor-
ding display will show “
H
”.
All inductive cooking zones have a booster function.
If the booster is activated the generator provides a
maximum power than to a cooking zone. The booster
function allows the user to heat up the food extremely fast
and hence can help to save time.
Booster function can be activated by pressing booster
funtion key and display show P. (Press
key to
active the Booster Function).
The booster function of each cooking zone can be activ-
ated for a limited time of 10 minutes. After time out, the
cooking zone return to level 9.
To cancel the booster function by change the power
level or turn off the cooking zone.
(H)
•
Stop & go function (
Select
F
key
)
Stop & go function allows temporary pausing of the
cooking process, allowing the users to answer the door
or the telephone without worrying that the water is boiling
over.
This function is also useful to clean the user interface sur-
face without changing the cooking set up.
Activating the stop function:
When at least one cooking zone is in operation, the hob
may be switched to standby bypress the stop &go key.
The Stop & Go LED is blinking and all the heater displays
show the
stop sequence.
To deactivate the stop function:
• if the key is touched for 1 second a beep sounds
and the heaters actual power setting is restored, or
• if the cooktop is stopped for more than 10 minutes the
cooktop is switched off automatically.
Changing the time
When the timer is in countdown the user can change the time
at any time by selecting the heater and touching the timer
[+TIMER] or [-TIMER] key, the countdown stops and the timer
changes to time selection status waiting a time selection.
Timer Countdown End
When the time set on the timer has run out, the timed heater
is switched off, the timer display and the timed heater led
starts blinking and a timer alarm beep sounds for one minute.
The timer alarm can be cancelled by the user at any time, ev-
en during the first minute of the alarm. When the timer is in
alarm status, by pressing any key of the touch control the tim-
er is switched of.
Switching off the timer
To cancel the operation of the timer, select the time value of
“00” using the [-TIMER_KEY] key or pressing the [+TIMER]
and [-TIMER] keys at the same.
•
Autokey-lock
When all the heaters are not powered, and one heater is
temporized at zero power level, the key-lock function is
activated after 1 minute.
•
Automatic actions
Protection from accidental activation of keys
If any key/s is maintained pressed for a more than 10 seconds,
the cooktop is switched off automatically. A warning beep sou-
nds every 10 sec., while the key/s is/are activated.
Heater auto switchoff in a specific time
After maximum time of operation at the same power level
(see the table below) the heater is switched off automatically.
The heater autoswitchoff time is automatically reset when the
power level is changed.
If the power level is not changed during a preset time, the cor-
responding heater turns off automatically.
The maximum time a heater can stay on, depends on the se-
lected cooking level.
•
Operating the timer
It is possible for the user to set a switch off time for all hea-
ters at any power level. The timer value can be selected
between 1 and 99 minutes. The timer last minute will be
displayed in seconds.
The [+TIMER] [-TIMER] keys will be locked:
o If the Cooktop is off, or
o if the key lock is activated (KEYLOCK LED on).
Selecting a timer for a heater
Once a heater is selected, a switch-off time can be select-
ed by touching key
(E)
+TIMER + or
(D) -
TIMER. When the
timer is off, it is activated by pressing the timer keys (D) or
(E). A beep sounds, the timer display shows a “00” blinking
and the timed heater LED blinks.
Selecting the time
When the timer is waiting a time selection the timer display
blinks. The timer value can be selected between 1 and 99
minutes touching the
(E)
+TIMER + or
(D) -
TIMER keys.
I
f the key [+TIMER] or [-TIMER] keys associated with the
timer is held down, the change speed is increased autom-
atically. This makes possible to reach the desired time set-
ting more quickly.
If the time is not selected before 10 seconds, the timer is
switched off.
If the selected time is “00” after 10 seconds the timer is
switched off.
Starting Timer Countdown
The countdown starts 5 seconds after the last operation over.
A beep sounds and the timer display stop blinking and also
led heater stops blinking if any power is selected.
The last minute will be displayed in seconds.
Power
le
v
el
M
ax
. ti
me
on
(
hou
rs
)
1
10
2
5
3
5
4
4
5
3
6
2
7
2
8
2
9
1
Table.1: Heater Auto switch off
