IS0614-00
Page
5
of
5
Recommended Fuse/Breaker Sizing
Replacing a lamp module
All TRX lamp modules are interchangeable and can be used in any position on the lightbar. This offers the
flexibility to configure a lightbar for any mission with perfect balance of flood, spot or dual color amber
white modules.
With this modular design the replacement of a TRX Lamp couldn’t be easier. Each module is hermetically
sealed so replacement will not compromise the watertight integrity of the lightbar or void the warranty.
To replace a lamp module simply remove the two lamp clips using a 9/64” hex tool. Unplug the lamp from
the waterproof connector, plug the new lamp in and reattach the lamp clips.
Maintenance
The best cleaning method is to gently wash the lightbar with a solution of mild soap and lukewarm water,
using a soft cloth or sponge to loosen any dirt or grime. Thoroughly rinse with clean water to remove any
cleaner residue and dry the surface with a soft cloth to prevent water spotting.
If using a high-pressure water cleaner and/or a steam cleaner the pressure should not exceed 1,450psi.
The use of additives to the water and/or steam should also be avoided.
Important Considerations for Lexan lenses:
• Never use abrasive or highly alkaline cleaners.
• Never use aromatic or halogenated solvents like toluene, benzene, gasoline, acetone or carbon
tetrachloride.
• Contact with harsh solvents such as methyl ethyl ketone (MEK) or hydrochloric acid can result in
surface degradation and possible crazing.
• Never scrub lenses with brushes, steel wool or other abrasive materials.
Part Number
Lamps
Amp draw
@13.8Vdc
Fuse/Breaker Size
(A)
TRX-03
1
1.3
3
TRX-06
1
2.1
5
TRX-10
2
4.2
10
