2
Spider Microbar Wiring
Red
+12Vdc
Black
Ground
Orange
Warning Mode 1
Blue
Warning Mode 2
Orange & Blue
Warning Mode 3
Red/White
Alt Mode Circle Fill
Brown/White
Alt Mode Circle Trail
Red/White & Brown/White
All Lamps On
Brown
N/A
Green
Intensity Control
Programming Instructions
Entering Programming Mode:
To activate the Lstick programming mode, connect the BLACK Wire to ground then simultaneously
attach the GREEN wire and the RED wire to +12 Vdc.
Changing Warning Patterns and Flash Rates:
Six unique warning patterns can be selected by using different combinations of the ORANGE, BLUE,
BROWN/WHITE and RED/WHITE wires. See example below:
ORANGE
WIRE
Warning
Mode
1
BLUE
WIRE
Warning
Mode
2
ORANGE and BLUE WIRES
Warning Mode 3
BROWN/WHITE WIRE
Alt Mode 1*
RED/WHITE WIRE
Alt Mode 2*
BROWN/WHITE and RED/WHITE WIRES
Alt Mode 3*
*Alt modes will override warning modes if both are activated simultaneously.
To change the warning mode, attach the wire(s) corresponding to the mode to be changed to +12Vdc.
Tap the Red/WHITE wire to +12Vdc to advance the flash pattern. See the list of available flash patterns
below.
A unique flash rate can be assigned to each warning mode. To change the flash rates enter the
programming mode as described above. Move the green wire from +12Vdc to Ground. Tap the
BROWN/WHITE wire to +12Vdc to advance the flash rate. See the list of available flash rates below.
M I C R O B A R
