IS0589B-01
09-11-18
SERVICE AND REPAIR
DANGER HIGH VOLTAGE
Should the light fail to operate, check to see that the proper voltage is reaching the unit. If the unit still fails to
operate, replace the lamp. To replace a lens or lamp, switch power off and wait 5 minutes before removing
lens.
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY
FOR CLASS I, DIVISION 2.
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN
SWITCHED OFF OR THE AREA IS KNOWN TO BE NON - HAZARDOUS.
TOMAR Electronics, Inc.
2100 West Obispo • Gilbert, Arizona 85233 USA
800-338-3133 • (480) 497-4400 • FAX (480) 497-4416
www.tomar.com