background image

7500 & 9000 Watt Generators

Part#: TG7500  &  TG9000

7500 / 9000 Max Watts, 6500 / 8500 Rated Watts
Run Time of 10 hours at 50% Load
7 gallon fuel tank for extended use
Electric Key Start with battery included on TG9000
2 Year Product Warranty

8” Gas Powered Concrete Scarifier

Part#: TSCAR8H

5.5 HP Honda GX160 Engine
Remove traffic lines at 800 - 1,000 linear ft/hr
Tungsten Carbide Blade Kit Available
OSHA approved dust port for silica vacuum removal
3 Year Engine Warranty & 1 Year Product Warranty

36” & 46” Concrete Power Trowel

Part#: TPT36K  &  TPT46K

6 HP Kohler CH260 & 9.5 HP Kohler CH395 Engines
Adjust trowel blade pitch from 0-28°
60-115 RPM rotor speed for superior concrete finishes
Includes float pan and trowel blades
3 Year Engine Warranty & 1 Year Product Warranty

2” and 3” Trash Water Pumps

Part#: TW2  &  TW3

Moves liquids at a rate up to 9,240 gallons/hour
Handle solids up to 0.6"
Cast iron impeller for smooth performance
6.5 HP engine protected by rugged all purpose frame
1 Year Product Warranty

INVERTER 

SERIES

120 Amp Portable Welder Generator

Part#: TWG120A

Steady 120 Amp DC welding output
60% Duty Cycle for extended use
Suitable for welding rods from 6010 to 6013
Includes wheel kit for job site portability
2 Year Product Warranty

INVERTER 

SERIES

210 Amp Portable Welder Generator

Part#: TWG210A

Steady 50 - 210 Amp DC welding output
60% Duty Cycle for extended use
Suitable for welding rods from 6010 to 7024
Electric Key Start with battery included
2 Year Product Warranty

3.7 Gallon 3HP Backpack Fogger

Part#: TMD14

Turbo Boosted Pump with 40ft + Horizontal Reach
Sprays 1 acre in 30 minutes
10X Faster than Manual Pump Sprayers
Converts to Leaf Blower with 200 MPH Air Velocity 
1 Year Engine Warranty & 1 Year Product Warranty

5 Gallon 1.8HP Backpack Sprayer

Part#: TPS25

Reach Up to 30ft Horizontal Reach
Sprays 1 acre in 15 minutes
10X Faster than Manual Pump Sprayers
Commercial Grade Pump
1 Year Engine Warranty & 1 Year Product Warranty

4 Gallon 3HP Backpack Spreader

Part#: TGS30

AND MORE

WELDING / POWER

PEST CONTROL

www.

tomahawk-power.com

(866) 577-4476

Reach Up to 30ft Horizontal Reach
Covers 1 acre in less than 30 minutes
20X Faster than Manual Broadcast Spreaders
Converts to Fogger with Liquid Tank Accessory
1 Year Engine Warranty & 1 Year Product Warranty

USE CODE 

SAVE10

AT CHECKOUT FOR 

10% OFF 

YOUR NEXT ORDER*

* Visit www.tomahawk-power.com for terms and conditions. Coupon must be redeemed at checkout at 
www.tomahawk-power.com. Coupon may be subject to change and/or expire at any time, without notice.

Содержание TVIB10

















Отзывы: