Tomahawk TG5500i, Руководство по эксплуатации

Страница: 10 / 32

3. CONTROL FUNCTION
1. Oil warning light (red)
When the oil level falls below the
required level, the oil warning light
will turn on and the engine will stop
automatically. Unless you refill with
oil, the engine will not start again.
Tip: If the engine stalls or does not
start, turn the engine switch to “ON”
and then pull the recoil starter.
If the oil warning light flickers for a few seconds,
the engine oil is insufficient. Add oil and restart.
2. Overload indicator light (Red)
The overload indicator light comes on
when an overload of a connected
electrical device is detected, the
inverter control unit overheats, or the
AC output voltage rises. Then, the AC
protector will trip, stopping power
generation to protect the generator and any connected
electrical devices. The AC pilot light (Green) will go off and the
overload indicator light (Red) will stay on, but the engine will
not stop running.
When the overload indicator light comes on and power
generation stops, proceed as follows:
1
）
Turn off any connected electrical devices and stop the
engine.
2
）
Reduce the total wattage of connected electrical
devices within the rated output.
3
）
Check for blockages in the cooling air inlet and around