11
2.5.2 Gas Engine with Electric Starter
1. Do not actuate starter for more than 20 seconds at a time. If engine does not start, wait
1 minute before repeating attempt. If engine does not start after two attempts, trace the
cause according to the Diagnosis Chart.
2. Make sure the key is always in the (1st) position when the engine is running. Make sure
that all warning lights are off when the engine is running. For engines with a starting
panel equipped with engine protection, make sure the OK light only is ON.
3. After starting, idle speed for a few minutes according to table:
10. Take the handle and pull the rope softly until it is extended to its full limit. Let the
rope rewind completely. Start the engine pulling strongly on the rope.
11. To stop the engine, move the accelerator lever into the stop position.
1st Position - Warning light ON
2nd Position - Starting
Temperature
Time
δ
- 20° C
5’
- 20° C / - 10 ° C
2’
- 10° C / - 5 ° C
1’
