Tomahawk JXPT24K, Руководство по эксплуатации

Страница: 9 / 44

9
2.9 Blades
The blades of the trowel are used to finish the concrete as they rotate around your given
surface. This trowel includes 4 combination blades (8 in./203mm wide) per rotor. They are
equally spaced in a radial pattern and attached to the vertical rotating shaft by means of the
spider assembly.
2.10 Centrifugal Clutch
In the event of a trowel runaway condition (the operator releases the handle), the centrifugal
clutch will stop the engine and bring the trowel to a complete stop.
2.11 Training
For proper training education, refer to the “TRAINING CHECKLIST” section located in the
back of this manual. This checklist contains an outline for an experienced operators to
provide training to a new operator.
3. TECHNICAL DATA
MODEL TPT36H TPT46H-270 TPT46H-390
Number of Blades 4 4 4
Ring Diameter 36.0 in. (91 cm.) 46.0 in. (116 cm.) 46.0 in. (116 cm.)
Rotor 70-130 RPM 70-130 RPM 70-130 RPM
Path Width 36.0 in. (91 cm.) 46.0 in. (116 cm.) 46.0 in. (116 cm.)
Vibration (Hand/Arm)1 18.9 m/s2 18.9 m/s2 18.9 m/s2
Sound Pressure (A-Weighted)2 83.5 dB(A) 83.5 dB(A) 83.5 dB(A)
Sound Pressure (Peak, C-Weighted) 90.5 dB(C) 90.5 dB(C) 90.5 dB(C)
Sound Power Level (A-Weighted) 97 dB(A) 97 dB(A) 97 dB(A)
Model Honda GX160 Honda GX270 Honda GX390
Type 4-stroke, Overhead valve, Single Cylinder 4-stroke, Overhead valve, Single Cylinder 4-stroke, Overhead valve, Single Cylinder
Bore X Stroke 68 X 45 mm 77 X 58 mm 88 X 64 mm
Displacement 163 cc 270 cm3 389 cm3
Max Output 5.5 hp @ 3,600 rpm 8.5 hp @ 3,600 rpm 13 hp @ 3,600 rpm
Fuel Tank Capacity 3.3 U.S. qts (3.1 liters) 5.6 U.S. qts (5.3 liters) 6.4 U.S. qts (6.1 liters)
Fuel Unleaded Gasoline Unleaded Gasoline Unleaded Gasoline
Lube Oil Capacity 0.61 US qt. (0.58 L) 1.16 US qt (1.1 L) 1.16 US qt (1.1 L)
Speed Control Method Centrifugal Fly-weight Type Centrifugal Fly-weight Type Centrifugal Fly-weight Type
Gearbox Oil Type SAE 10W-30 SAE 10W-30 SAE 10W-30
Starting Method Recoil Start Recoil / Electric Recoil / Electric
En
gi
ne
S
pe
ci
fic
at
io
ns
Tr
ow
el
S
pe
ci
fic
at
io
ns
POWER TROWEL SPECIFICATIONS
POWER TROWEL SPECIFICATIONS