Tomahawk 20600, Инструкция по эксплуатации

Страница: 11 / 20

11
ENGLISH
SPECIFICATIONS
NEEDED ACCESSORIES
INTRODUCTION
Congratulation that you took the choice to purchase this Tomahawk RC model airplane, a very good
choice from our point of view.
We at Tomahawk Aviation put a lot of attention to the overall quality of the airplane in terms of de -
sign, performance and manufacturing quality. We used all of our experience designing and building
high quality aircraft in order to present you an exceptional product. We chose high grade material
and looked after high end accessories in order to ensure top level outcome in terms of function,
performance and durability of the product. We are open and offer all necessary support in case you
should find any problem with your airplane.
As you are well aware this is a technical product. Due to its nature it is required if not mandatory to
read the instruction manual completely. Please follow the steps to complete your model as descri -
bed. It will ensure that your model will turn out in the best possible way. Please also take notice and
good care about the warning messages at the end of the instruction manual. Knowing about them
ensures that you can operate the model in the safest possible manner keeping risk away from you
and other persons. Also ensure that you comply with the latest legislation in terms of flight safety.
We at Tomahawk Aviation wish you all the best for building and especially operating your RC air -
plane. In case you have any questions please contact us. We are driven to offer the best possible
support at any time.
Span 2000 mm
Length 1180 mm
Flying weight 1630 g
Wing area 37,95 dm²
Airfoil RG-15
ARF-Version PNP-Version
Motor Roxxy BL Outrunner C35-48-1150kV Himax C3522 (1100 kV) built-in
ESC Roxxy BL Control 80A Roxxy BL Control 80A
Servos 6x Hitec HS-65MG 6x Tomahawk TDS-155 MG built-in
Servo cables Appr. 2m built-in
Multilock 2x Mulitlock system built-in
MPX plugs 2 pair MPX plugs built-in
Akku 4S LiPo 2000-2500mAh 4S LiPo 2000-2500mAh
Luftschraube 11 x 8“ 11 X 8“ Carbon Prop included
Spinner 38 mm 38 mm Alu Turbo Spinner included
TX min. 5 Channels min. 5 Channels
RX min. 7 Channels min. 7 Channels
Glues 5min epoxy resin
UHU Por, Velcro tape
5min epoxy resin
UHU Por, Velcro tape