18
OPERATION
You can use this useful hand mixer to quickly mix or
knead various liquids or dough. The speed can be easily
adjusted to the thickness of the mixture. When you’ve
finished, you can remove the beaters or dough hooks
from the appliance by pressing the button; safe and
quick.
USING FOR THE FIRST TImE
• Remove all packaging from the appliance.
• Clean the appliance, see 'Cleaning and Maintenance'.
• Continue with the procedure in ‘Using the appliance’.
USING THE APPLIANCE
• Insert the beaters or dough hooks into the round
openings on the bottom of the appliance.
- the kneading hook which is equipped with a collar
will only fit in the largest opening. The beaters will
fit in both openings.
- make sure the tabs on the beaters/dough hooks fit
well into the recesses of the round openings. Press
each beater/dough hook in until it clicks into place.
• Put the ingredients into a bowl.
• Insert the plug into the mains power socket.
• Keep the beaters/dough hooks in the ingredients.
• Switch the appliance on by setting the speed regulator
to position 1.
• You can increase the speed by setting the speed
regulator to a higher position or by pressing the turbo
button.
• Switch the appliance off by setting the speed regulator
to position 0.
• After use, remove the plug from the wall socket.
• Press the EJECT button to remove the beaters/dough
hooks from the appliance.
• Clean the beaters/dough hooks and the motor unit
(see ‘Cleaning and maintenance’).
NOTE
• Never insert anything into the ventilation openings.
Make sure they are unobstructed.
• If you are not using the appliance, switch it off and
place it on its flat side. The beaters or dough hooks
will then be pointing straight ahead.
CLEANING AND mAINTENANCE
Warning
Before cleaning the appliance, always switch it off and
remove the beaters/dough hooks from it.
Cleaning
• Do not use aggressive cleaners, abrasives or a sharp
object, such as a hard brush or a knife, for cleaning.
• Wash the beaters and the dough hooks in hot soapy
water. These parts are also dishwasher-safe.
• Clean the motor unit with a damp, soft sponge and
a little washing-up liquid. The motor unit must not be
immersed in water.
Instruction manual
TM-6678