17
1. Cover clasp
2. Cooking plates
3. Temperature-control dial
4. Mould for cones
5. Mould for wafer rolls
6. Spatula
7. Red status lamp
8. Power cord with plug
OPERATION
General Information
This appliance is designed to bake wafers.
bEFORE uSING FOR THE FIRST TIME
Remove the appliance from the packaging material.
Clean the appliance. See ‘Cleaning and maintenance’.
Place the appliance on a level, stable surface. Insert
the plug into the mains power socket. The red status
lamp will glow to indicate that the appliance is switched
on. Set the thermostat to the highest setting (to the
right) and allow the appliance to heat up for five
minutes. This will burn away any dust and possible
manufacturing residues. The appliance may emit a
little smoke while heating up. This is normal and does
not indicate a problem with the appliance. Make sure
the area is well-ventilated. The status lamp goes out
when the appliance is ready for use (once the desired
temperature has been reached). Remove the plug
DESCRIPTION OF PARTS
2
3
1
4
7
6
5
8
Instruction manual
TM-1304
