2012/07/04
TOKYO ELETECH
Revision history:
2012/06/07 Initial revision
The following precautions apply to the product described in this manual.
Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step when carrying the
product. Do not use the product in an unstable location such as a place exposed to strong vibration or a sloping surface.
Do not place anything on the product or expose the product to physical shocks. Do not carry the product after the power has
been turned on. Doing so may cause a malfunction due to overloading or shock.
Since the product contains many electronic components, keep it away from direct sunlight, high temperature, and high humidity
to prevent condensation. Do not use or store the product where it is exposed to much dust or a strong magnetic or electric field
for an extended period of time. Inappropriate operating or storage environments may cause a fault.
Use the product within the ranges given in the specifications. Operation over the specified ranges may cause a fault.
To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal parts of any of the
connectors. Before handling the product, touch a metal object (such as a door knob) to discharge any static electricity from your
body.
Always turn the power off before connecting or disconnecting any cables from the product. When unplugging a cable, unplug
the cable by holding the connector part without pulling on the cable itself. Pulling the cable itself or bending it may expose or
disconnect the cable core, resulting in a fault.
It is recommended that it be stored in the original packaging. Transporting the product may cause a damage or fault. Therefore,
keep the packaging materials and use them when re-shipping the product.
The contents of this document are subject to change without notice.
The information, such as descriptions of function and application circuit examples, in this document are presented solely for the
purpose of reference to show examples of operations and uses of Spansion Inc. and other vendors device; TOKYO ELETECH
and Spansion Inc. do not warrant proper operation of the device with respect to use based on such information. When you
develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such
use of the information. TOKYO ELETECH and Spansion Inc. assume no liability for any damages whatsoever arising out of the
use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license
of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of TOKYO
ELETECH or any other right of Spansion Inc. or any third party or do TOKYO ELETECH and Spansion Inc. warrant
non-infringement of any third-party's intellectual property right or other right by using such information. TOKYO ELETECH
and Spansion Inc. assume no liability for any infringement of the intellectual property rights or other rights of third parties which
would result from the use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for general use, including
without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed
and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured,
could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss
(i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life
support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible
repeater and artificial satellite). Note that TOKYO ELETECH and Spansion Inc. will not be liable against you and/or any third
party for any claims or damages arising in connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such
failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and
prevention of over-current levels and other abnormal operating conditions.
Exportation/release of any products described in this document may require necessary procedures in accordance with the
regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
The company names and brand names herein are the trademarks or registered trademarks of their respective owners.
