TOKIT Omni Cook Скачать руководство пользователя страница 17

15

Turn the device off by pressing the control knob for 3 
seconds. change the parameter configuration or skip to 
next step in smart recipe by turning the control knob; start 
or pause the current cooking operation by  clicking the 
control knob shortly.

Turbo mode

Crushing food fast

In this mode, the configurations are preset to 
particular parameters and not adjustable; Press 
the Turbo mode icon again to exit this mode; 
To avoid any unpredictable situations, do not 
leave the device unattended when using this 
mode. During its operation, please ensure that 
the mixing bowl lid is in place and the 
measuring cup has been properly mounted.

Weighing mode

Weighing food materials

Press the control knob to reset to Zero.

Mode

Function

Important notes

Kneading mode

Kneading dough

Cooking temperature and mixing speed are 
fixed, and not adjustable in this mode. 
Ingredients can be added via the inlet opening 
on the top of the mixing bowl lid, for example, 
to add water.

Manual control

In Manual control, you can 
configure the cooking time, 
temperature, and mixing 
speed on your demand.
Note: With Manual control,the 
maximum cooking time is 99 
minutes, the maximum cooking 
temperature is 180 

°

C, and the 

maximum mixing speed is  10.

When you are unfamiliar with the operation of 
this device, you are recommended to follow 
the procedures and settings in the recipes 
from your Omni Cook to ensure proper 
operation of the device for cooking.

List of preset modes

Ice shaving mode

Crushing ice, you can 
select coarse ice or fine 
ice 

The cooking temperature is locked and not 
adjustable in this mode. During its operation, 
please ensure that the mixing bowl lid is in 
place and the measuring cup has been 
properly mounted to prevent crushed ice from 
splashing.

Juicer mode

Extracting  juice from 
fruits/vegetables that are 
rich in water.

The cooking temperature is locked and not 
adjustable in this mode. During its operation, 
please ensure that the mixing bowl lid is in 
place and the measuring cup has been 
properlymounted to prevent liquid from 
splashing and overflowing .

Grinding mode

Grinding cereal and 
pulverizing food materials

The cooking temperature is locked and not 
adjustable in this mode. You are recommended 
to cut the food materials into small pieces for 
better and more thoroughly uniformly grinding 
of the food materials.

Mincing mode

Preparing minced meat 
and crushing food 
materials

The cooking temperature is locked and not 
adjustable in this mode. This mode is not 
suitable for food materials with higher 
hardness or higher water content, e.g., frozen 
meat, fruit.

Содержание Omni Cook



























Отзывы: