manualshive.com logo in svg

Tokheim QUANTIUM 410, Руководство по установке

Поделиться
Скачать
Tokheim QUANTIUM 410 Скачать руководство пользователя страница 8

Page 1-2

Document Ref 909342-001 Rev 11

Introduction

Quantium 410 Installation Manual

1

INTRODUCTION

1.1

How To Use This Manual

It is recommended that all relevant persons familiarise themselves with the contents of this
manual prior to carrying out any operations or procedures.

This manual is divided into sections which are described as follows: -

Section 1 - Introduction

This section contains information on how to use the manual, the scope of equipment covered,
recommendations on qualified technicians and contact information.  It also includes relevant
health and safety information required for the safe installation and commissioning of the
product.

Section 2 - Site Preparation

This section details the procedures to be carried out in preparation for receipt of equipment
at site and the necessary actions prior to installation.

Section 3 - Drawings

All necessary drawings required for reference during the installation and commissioning
are listed and contained in this section.

Section 4 - Packaging and Handling

This section provides instructions for unpacking and safe handling of the equipment
including access to the hydraulic and calculator areas.

Section 5 - Installation

The instructions for the correct installation of the equipment are contained within this
section.

Section 6 - Commissioning

This section highlights the actions and checks, to be carried out, in preparation for the
commissioning activity and the procedures required from commissioning of the equipment
to handover.

1.2

Product Scope

The equipment and models covered by the contents of this manual are: -

The Quantium 410 range of fuel dispensers, with the exception of the LPG version.  For
information on Quantium LPG dispensers refer to the relevant LPG manual as provided
by Tokheim.

All dispensers in the Quantium 410 range use the same standard sub-assemblies and offer
a wide range of configurations and includes provision for options such as integrated
payment terminal, vapour recovery etc.

Содержание QUANTIUM 410







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды